How long do lyophilized peptides last?

The short answer: most lyophilized peptides stay stable for several years at −20 °C, away from bright light. That is GenScript’s figure, and it is general guidance, not a promise for any one lot.

The time depends on the sequence and on how the vial is kept. Peptides in solution keep for far less time. Our storage guide covers the handling steps.

General information for in vitro laboratory research. For research use only. Not for human or animal consumption.

Temperature

Peptide shelf life at each temperature

01

Room temperature

Days to weeks, according to Sigma-Aldrich’s handling guide. Keep this time short and move vials to cold storage as soon as you can.

02

Refrigerator, 4 °C

A few weeks to several months, according to JPT. Cold slows degradation but does not stop it.

03

Freezer, −20 °C or colder

Several years for most lyophilized peptides, according to GenScript. JPT’s range is several months to years, depending on the sequence and conditions.

Stability

What shortens shelf life

01

Moisture

Water can break peptide bonds through hydrolysis. Peptides containing Asp, Glu, Lys, Arg or His also pull moisture from the air, so GenScript advises a desiccator and a tightly capped vial.

02

Air

Peptides containing cysteine, methionine or tryptophan are prone to oxidation. Limit air exposure and reseal vials tightly.

03

Sequence

Stability is unique to each peptide. GenScript notes that certain residues can limit long-term stability, and JPT notes that asparagine can undergo deamidation.

04

Freeze-thaw cycles

Repeated freezing and thawing can degrade peptides. Condensation from opening a cold vial again and again also adds moisture.

In practice

Good practice in the lab

01

Store it cold on receipt

Sigma-Aldrich advises 4 °C or colder on receipt, away from bright light. Use −20 °C or colder for long-term storage.

02

Divide it up

GenScript advises working out the amount each experimental set needs and aliquoting into separate vials. This cuts freeze-thaw cycles and air exposure.

03

Keep the lot number

Record the lot number and the date received. A certificate belongs to one lot, so the record ties each vial to its test results.

04

Test, don’t assume

For long storage, JPT recommends periodic stability testing. HPLC can show whether a stored sample has changed.

Sources

Where these figures come from

General guidance from peptide manufacturers: GenScript, Peptide Storage and Handling Guidelines, JPT, How Long Do Peptides Last?, JPT, How to Store Peptides and Sigma-Aldrich, Handling and Storage of Synthetic Peptides. These are general figures, not stability data for any Aurea Labs lot.

FDA statement

These statements have not been evaluated by the U.S. Food and Drug Administration. Neither the statements on this website nor the products of this company are intended to diagnose, treat, cure or prevent any disease.