Peptide purity testing: what it measures

The short answer: purity testing asks what share of the material in the vial is the peptide on the label. HPLC answers it by separating the sample and reporting the main peak as a percentage of the total.

A purity figure says nothing about how much of the powder’s weight is peptide, which is a separate measurement. Our how we test page covers the testing behind every Aurea Labs lot.

General information for in vitro laboratory research. For research use only. Not for human or animal consumption.

Method

How purity is measured

01

Separation

In reverse-phase HPLC a dissolved sample is pushed through a packed column. Each compound leaves at its own retention time and appears as a peak.

02

The main peak

Purity is the main peak’s share of the total peak area, reported as a percentage.

03

What sits beside it

The other peaks are related material from synthesis and handling, such as shorter chains and degradation products.

Limits

What a purity figure does not tell you

01

Not the peptide content

Purity and net peptide content are separate numbers. A sample can be highly pure by HPLC and still have a peptide content well below 100%. See net peptide content.

02

Not the identity

A clean peak can still be the wrong molecule. Identity is established separately, by comparing the sample against a reference standard of the named peptide.

03

Not the counter-ion

The salt left behind by synthesis is part of the powder’s weight, not part of the purity figure. See what the salt form means.

04

One lot only

A purity result belongs to the lot that was tested. A new batch needs its own test.

Reading a result

What to look for

01

The method beside the number

A figure is only meaningful with its method stated. HPLC purity is the standard figure for a synthetic peptide.

02

The lot number

The lot number is what ties a certificate to the vial in your hand.

03

Who ran it

An independent accredited laboratory’s result does not rest on the seller’s word. Aurea Labs lots are tested by ILS Laboratories, an ISO/IEC 17025 accredited laboratory, and released at 99% purity or higher with a certificate published as each lot finishes testing.

04

Testing it yourself

An accredited laboratory can test an unopened vial. Our refund policy covers a lot whose test shows purity below 99%.

Sources

Where this comes from

General information from peptide manufacturers’ technical pages: Bachem, Solid Phase Peptide Synthesis (SPPS) explained and GenScript, Impact of Counter-Ion in Peptide. For the methods behind Aurea Labs certificates, see how we test.

FDA statement

These statements have not been evaluated by the U.S. Food and Drug Administration. Neither the statements on this website nor the products of this company are intended to diagnose, treat, cure or prevent any disease.