What is a lyophilized peptide?
The short answer: a lyophilized peptide is a freeze-dried peptide. The water is removed from a frozen sample, which leaves a dry, porous solid in the vial.
Lyophilization is used to improve stability and shelf life, so peptides are commonly supplied this way. GenScript, for example, delivers all of its peptides in lyophilized form, and our peptide vials are lyophilized too.
General information for in vitro laboratory research. For research use only. Not for human or animal consumption.
How freeze-drying works
Prefreezing
The sample is frozen first. Freeze-drying takes material from a solid straight to a gas, so it has to start fully frozen.
Primary drying
Under vacuum, the ice is removed by sublimation: it goes directly to a gas without passing through the liquid phase.
Secondary drying
The sample looks dry by now, but bound moisture remains. Further drying at a warmer temperature brings it down.
Why peptides are supplied dry
Less water, less breakdown
Removing water greatly reduces the risk of hydrolysis and microbial growth, according to JPT.
Longer shelf life
Most lyophilized peptides are stable for several years at −20 °C, according to GenScript. The shelf life of a solution is very limited. Our shelf life guide has the details.
Some room-temperature tolerance
Lyophilized peptides are stable for days to weeks at room temperature. That allows for short handling periods, not long-term storage.
Still needs care
Dry does not mean protected. The powder can take up moisture from the air and can still oxidize. Our storage guide covers what to do.
What the powder contains
Counter-ions
Peptides contain counter-ions such as acetate or trifluoroacetate. They count toward the weight of the powder but are not peptide.
Residual moisture
A small amount of bound water stays after drying. Water taken up from the air can lower the peptide content further.
Net peptide content
This is the percentage of the gross weight that is peptide. Bachem gives 70–90%. Bio-Synthesis gives 50–90%, depending on purity, sequence and the method of synthesis and purification.
Not the same as purity
HPLC purity and peptide content are separate measurements. Bachem notes that peptides over 95% pure by HPLC can still have a peptide content of 70–90%. How we test explains purity.
Where this comes from
General information from peptide manufacturers and a laboratory equipment maker: Labconco, A Guide to Freeze Drying for the Laboratory, JPT, How to Store Peptides, GenScript, Peptide Storage and Handling Guidelines, Bachem, Care and Handling of Peptides and Bio-Synthesis, What does net peptide content mean?. These are general figures, not measurements of any Aurea Labs lot.
These statements have not been evaluated by the U.S. Food and Drug Administration. Neither the statements on this website nor the products of this company are intended to diagnose, treat, cure or prevent any disease.

